Configurator Hose Assemblies

Home
Back to Start
Select: hose coupling side 1 (TW System 'EN 14420-6')
Coupler'TW' Hose couplings EN 14420-6. Working pressure up to 16 bar.

Adapter'TW' hose couplings EN 14420-6. Working pressure up to 16 bar.
Stainless SteelSS = Stainless Steel

Stainless Steel (PFA Coating)SSE = Stainless Steel (PFA Coating)
Stainless steel, but parts in contact with liquid with an additional coating of Teflon® (FDA approved).The PFA coating is used when the chemical resistance of stainlees steel is not sufficient like for hydrochloric acid, ferro-III-chloride, diluted sulfuric acid.

BrassBr = Brass
Stainless SteelSS = 316 Stainless Steel 1.4401 (other grades available on request)

BrassBr = Brass
PolyurethaneBrass Couplings: Polyurethane blue (Standard). For hot asphalt only take Thermopac (HBD). PTFE (Teflon®) white available for special applications.

PTFEStainless Steel Couplings: PTFE (Standard). On request also available of polyurethane, Viton®, EPDM or Thermopac.
Hypalon®Stainless Steel: Hypalon® (Standard). Also available of NBR, EPT, FKM, Viton® Extreme, silicone and polyurethane (see page 393). For PTFE please ask back because of hardness.

NBRBrass: NBR (Standard). Also available of EPT, CSM, FKM or polyurethane. For PTFE please ask back because of hardness.
Stainless SteelSS = 316 Stainless Steel

Plated Carbon SteelPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
SELECTION
DCSG
COUPLINGS
75MM
TW
chosen option
selectable
non selectable
Matrix
5Hose Coupling 2
6Part No.

Part Number

DCSG 75 L1=m...

Hose TypeDanchem SG - Polypropylene lined composite hose with stainless steel inner wire and galvanised mild steel outer wire.
Size (ID)75 mm (3")
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingTW System 'EN 14420-6'
Please Note:
For the correct choice of coupling and sealing materials please refer to our
chemical resistance chart or contact our sales team.