Configurator Hose Assemblies

Home
Back to Start
Select: hose coupling side 1 (TW System 'EN 14420-6')
1
Type: Hose Selection Guide
2
Hose Type: Danoil 3AG - Polypropylene lined composite hose with aluminium inner wire and galvanised mild steel outer wire.
2
Size (ID): 75 mm (3")
3
Length (L1): next m (Length Between Sealing Surfaces)
4
Hose Coupling 1: Quick Couplings
5
Coupling 1: TW System 'EN 14420-6'
5
Coupling Detail 1
Coupler'TW' Hose couplings EN 14420-6. Working pressure up to 16 bar.
Adapter'TW' hose couplings EN 14420-6. Working pressure up to 16 bar.
Stainless SteelSS = Stainless Steel
Stainless Steel (PFA Coating)SSE = Stainless Steel (PFA Coating)
Stainless steel, but parts in contact with liquid with an additional coating of Teflon® (FDA approved).The PFA coating is used when the chemical resistance of stainlees steel is not sufficient like for hydrochloric acid, ferro-III-chloride, diluted sulfuric acid.
BrassBr = Brass
Stainless SteelSS = 316 Stainless Steel 1.4401 (other grades available on request)
BrassBr = Brass
PolyurethaneBrass Couplings: Polyurethane blue (Standard). For hot asphalt only take Thermopac (HBD). PTFE (Teflon®) white available for special applications.
PTFEStainless Steel Couplings: PTFE (Standard). On request also available of polyurethane, Viton®, EPDM or Thermopac.
Hypalon®Stainless Steel: Hypalon® (Standard). Also available of NBR, EPT, FKM, Viton® Extreme, silicone and polyurethane (see page 393). For PTFE please ask back because of hardness.
NBRBrass: NBR (Standard). Also available of EPT, CSM, FKM or polyurethane. For PTFE please ask back because of hardness.
Plated Carbon SteelPlated carbon steel, (plated mild steel) Tri Valent plated unless requested otherwise.
AluminiumAl = Aluminium
Aluminium with CopsafeAl = Aluminium with COPSAFE

The main task of the COPSAFE System is to prevent costly product mixup between fuel grades and can also be used for ASS/QSS systems (e.g. Germany).
Complies to EN 13765 and the international electrostatic standard requirements.
SELECTION
D3AG
COUPLINGS
75MM
TW
chosen option
selectable
non selectable
Matrix
5Hose Coupling 2
6Part No.

Part Number

D3AG 75 L1=m...

Hose TypeDanoil 3AG - Polypropylene lined composite hose with aluminium inner wire and galvanised mild steel outer wire.
Size (ID)75 mm (3")
Length (L1)next m (Length Between Sealing Surfaces)
 
Hose End Fitting One Side
CouplingTW System 'EN 14420-6'
Please Note:
For the correct choice of coupling and sealing materials please refer to our
chemical resistance chart or contact our sales team.